3Shape Academy

Click here to register

1-day training

Learn how to scan for crowns, bridges, aligners, implants and dentures.

You will learn all about the TRIOS® intraoral scanner with the focus being on its intuitive functionality, using A.I. and the digital workflow.
Through hands-on exercises, you will learn how to integrate it into your clinic and begin to collaborate with digital labs.

Upon completion of the course, you will be able to:

• Scan patients for a range of indications including crowns, bridges, aligners, implants and dentures;
• Use digital tools to communicate with the lab and patient;
• Add HD Photos and video;
• Take shade measurements;
• Send the encrypted cases to the lab;
• Calibrate and maintain the scanner.

Click here to register

2-days training

Learn how to scan, design and produce crowns and inlays in your own clinic with TRIOS Design Studio®
You will learn about the digital workflow for TRIOS Design Studio. Through hands-on exercises you will learn how to scan, design and mill or print your own restorations in-house.

Upon completion of the course, you will be able to:

• Scan patients;
• Design your own restorations such as crowns, inlays and screw retained crowns;
• Mill your crown designs;
• Print your temporary designs.

Click here to register

2-days training

Using Dental System, you will learn how to scan and design core indication such as crowns, bridges, copings, frames and wax-ups.
This course is dedicated for dental technicians with a low to moderate experience with dental CAD software. You will also learn how to correctly connect, maintain and calibrate them with the D and E series scanners as well as import and work with intraoral scans. This training will be conducted on Dental System Premium software without add-ons.

Upon completion of the course, you will be able to:

• Scan core indications;
• Correctly define an order form;
• Find old cases and modify them;
• Design crowns, bridges, anatomical copings, splints, digital diagnostic wax-up;
• Transform virtual models to physical models in Model Builder;
• Use Virtual articulator;
• Prepare digital restorations for production;
• Use Smile Design and Patient Specific Motion to guide the 3D design of prosthetics..

Click here to register

1-day training

Using Dental System, you will learn how to design different types of implant abutments and multilayer structures for single unit cases.
During this introduction to Implant-based cases, you will learn about the scanning, design and manufacturing of single-unit implant-based restorations. You will also learn how to work on TRIOS scans and how to make 3D printed models with implant analogs.

Upon completion of the workshop, you will be able to handle advances indications including:

• Define the order form for different types of single-unit implant-based restoration;
• Design screw-retained crowns on Ti-bases;
• Design customised abutments with supra structures in one design workflow;
• Modify screw channel angulation;
• Design multi-layer structures and modify screw-channel assembly;
• Design a TRIOS case with 3D printed model;
• Import implant libraries;
• Scan using scan bodies.

Click here to register

1-day training

Learn how to scan for crowns, bridges, aligners, implants and dentures.

You will learn all about the TRIOS® intraoral scanner with the focus being on its intuitive functionality, using A.I. and the digital workflow.
Through hands-on exercises, you will learn how to integrate it into your clinic and begin to collaborate with digital labs.

Upon completion of the course, you will be able to:

• Scan patients for a range of indications including crowns, bridges, aligners, implants and dentures;
• Use digital tools to communicate with the lab and patient;
• Add HD Photos and video;
• Take shade measurements;
• Send the encrypted cases to the lab;
• Calibrate and maintain the scanner.

Click here to register

2-days training

Learn how to scan, design and produce crowns and inlays in your own clinic with TRIOS Design Studio®
You will learn about the digital workflow for TRIOS Design Studio. Through hands-on exercises you will learn how to scan, design and mill or print your own restorations in-house.

Upon completion of the course, you will be able to:

• Scan patients;
• Design your own restorations such as crowns, inlays and screw retained crowns;
• Mill your crown designs;
• Print your temporary designs.

Click here to register

2-days training

Learn how labs and clinics can use Implant Studio® to provide guided surgery for implant cases.
With this prosthetically driven workflow, you will perform implant planning for single implant cases, multiple implant cases and for edentulous cases in both jaws. Surgical guides will be created through hands-on exercises.

Upon completion of the course, you will be able to:

• Import intraoral scans and CBCT data;
• Adjust and adapt CBCT data and align it to the intraoral scan;
• Create a panoramic curve and define the position of the mandibular nerve;
• Select, place and adjust implant position;
• Design and produce surgical guides ;
• Test your designs with hands on drilling practice;
• Design and produce immediate temporization;
• Generate surgical reports and drilling protocols;
• Generate an STL file for printing.

Click here to register

2-days training

Using 3Shape orthodontic software you will create and analyze digital study models.
Through hands-on exercises, you will learn how to use the various functions to create a digital study model, analyze, simulate treatments and perform virtual setups.

Upon completion of the course, you will be able to:

• Create a digital orthodontic study model;
• Perform digital segmentation of the teeth;
• Perform measurements and produce reports;
• Plan treatments and simulate outcomes;
• Perform virtual IPR and tooth extraction;
• Compare different treatment outcomes;
• Export model sets for production;
• Produce documentation for records;
• Communicate with partners.

Click here to register

1-day training

Using Appliance Designer, you will work with visual CAD/CAM tools and workflows to get optimal results
During the 1-Day Appliance Designer workshop, you will acquire sufficient knowledge for the optimal use of Appliance Designer and how to get the most of this product in your lab.

Upon completion of the course, you will be able to:

• Setup Ortho Control Panel to achieve optimal results in your lab;
• Create Appliances from Workflow/Templates;
• Create your own modelling templates;
• Import and Export functionalities;
• Optionally, bring your cases to seek advice from our experts.

Click here to register

1-day training

Using 3Shape orthodontic software you will plan, design and produce clear aligners.
You will learn about the 3Shape Clear Aligner Studio® and how it can be used to plan, design and create clear aligners. There will be a question and answer session where you can raise your specific questions.

Upon completion of the course, you will be able to:

• Follow the full clear aligner workflow;
• Calculate the number of virtual sub-setups;
• Animate tooth movement and optimize treatment;
• Add attachments, plan for IPR and extractions;
• Add ID tags to models;
• Export sub-setups for production;
• Produce documentation for records;
• Cut, grind and polish the aligner for evaluation.

Click here to register

1-day training

Using 3Shape orthodontic software you will place virtual brackets and design an indirect transfer tray.
You will learn about 3Shape Indirect Bonding Studio and how it can be used to plan treatments and place brackets using bracket transfer media. Through hands-on exercises you will segment teeth, place virtual brackets and design transfer trays.

Upon completion of the course, you will be able to:

• Follow the full Indirect Bonding Studio workflow;
• Segment teeth, establish and adjust FA points;
• Choose the correct arch shape;
• Place and adjust virtual brackets;
• Design bracket transfer trays;
• Generate an STL file for printing;
• Produce documentation for records;
• Communicate with partners.

Click here to register

1-day training

Learn all about the newest features and how to scan for difficult cases.
You will learn all about the TRIOS® intraoral scanner with the focus being on scanning for advanced cases, exporting scans and integrating with other 3Shape products. You will learn how to scan for partially edentulous cases and surgical guides.

Upon completion of the course, you will be able to:

• Take the bite in different jaw relations;
• Utilize Patient Specific Motion;
• Scan for edentulous cases and surgical guides;
• Use the pre-preparation function;
• Scan for Clear Aligners;
• Use the newest features of TRIOS such as Treatment Simulator, Smile Design, Patient Monitoring and more;
• Use the newest TRIOS scanners;
• Get hands on practice for scanning Scan bodies and Emergence profile;
• Learn about how to handle deep preparations.

Click here to register

2-days training

Using Dental System, you will learn how to scan and design core indication such as crowns, bridges, copings, frames and wax-ups.
This course is dedicated for dental technicians with a low to moderate experience with dental CAD software. You will also learn how to correctly connect, maintain and calibrate them with the D and E series scanners as well as import and work with intraoral scans. This training will be conducted on Dental System Premium software without add-ons.

Upon completion of the course, you will be able to:

• Scan core indications;
• Correctly define an order form;
• Find old cases and modify them;
• Design crowns, bridges, anatomical copings, splints, digital diagnostic wax-up;
• Transform virtual models to physical models in Model Builder;
• Use Virtual articulator;
• Prepare digital restorations for production;
• • Use Smile Design and Patient Specific Motion to guide the 3D design of prosthetics.

Click here to register

2-days training

Learn how labs and clinics can use Implant Studio® to provide guided surgery for implant cases.
With this prosthetically driven workflow, you will perform implant planning for single implant cases, multiple implant cases and for edentulous cases in both jaws. Surgical guides will be created through hands-on exercises.

Upon completion of the course, you will be able to:

• Import intraoral scans and CBCT data;
• Adjust and adapt CBCT data and align it to the intraoral scan;
• Create a panoramic curve and define the position of the mandibular nerve;
• Select, place and adjust implant position;
• Design and produce surgical guides ;
• Test your designs with hands on drilling practice;
• Design and produce immediate temporization;
• Generate surgical reports and drilling protocols;
• Generate an STL file for printing.

Click here to register

2-days training

Using Dental System, you will learn how to digitally design and produce dentures, removable partial dentures and try-ins.
After scanning models and accepting intraoral scans you will learn how to design a variety of removables. During the course you will learn about the different manufacturing possibilities and assembly types depending on whether you want to print, mill or combine the two processes.

Upon completion of the course, you will be able to:

• Set up order forms;
• Scan and design core indications:
  • Full dentures and variants
  • Removable partial dentures
  • Frameworks for RPDs
  • Try-in Dentures
  • Copy Denture workflow
• Create different .STL files for printing or milling;
• Set up Control Panel configuration;
• Import/Export material and implant libraries.