Académie 3Shape

Formation en dentisterie numérique pour les professionnels du secteur dentaire

Vous recherchez des cours, des séminaires et des supports de formation pour tirer le meilleur parti de votre solution de CFAO et donner une nouvelle dimension à votre pratique dentaire numérique ?

Qu'est-ce que l'Académie 3Shape ?

Formez-vous à votre rythme

Nos experts produits sont prêts à vous aider à approfondir vos connaissances en CFAO dentaire, quel que soit votre point de départ. Choisissez le type de formation qui vous convient le mieux : individuelle ou en groupe, en direct ou à la demande, en ligne ou hors ligne.

Consultez les pages des Académies 3Shape locales pour en savoir plus sur les formations proposées dans votre région.

Découvrez aujourd'hui l'innovation dentaire de demain !

Rejoignez 3Shape et nos partenaires, leaders mondiaux dans leur domaine, du 19 au 23 octobre pour une démonstration en ligne GRATUITE des solutions et des flux de travail les plus récents en dentisterie numérique. Laissez-vous inspirer et apprenez à maîtriser votre outil informatique !

Centre de formation en ligne

Pour les professionnels dentaires, s'adapter à de nouvelles méthodes de travail en cette période difficile ne doit pas signifier renoncer à l'acquisition de nouvelles connaissances ou au développement de leur compétences. C'est pourquoi nous vous proposons différentes solutions pour perfectionner votre savoir-faire en matière de dentisterie numérique sans quitter le confort et la sécurité de votre domicile ou de votre lieu de travail.
Découvrir

FORMATION VIRTUELLE

Formation dispensée en anglais.

Rejoignez un petit groupe de confrères (maximum six par classe) pour une formation pratique approfondie sur les flux de travail numériques qui peuvent contribuer à la croissance de votre entreprise. Apprenez toutes les techniques nécessaires en partageant votre écran avec votre formateur 3Shape et les autres participants pour être sûr de maîtriser chaque étape du flux de travail et atteindre les objectifs d'apprentissage prédéfinis.

Vous participerez à une classe de deux heures avec un expert 3Shape, précédée d’une heure d’autoformation guidée.

Il est essentiel que tous les participants installent le bon logiciel 3Shape sur leur ordinateur avant le début des cours, et qu'ils partagent leur écran pendant les cours afin de tirer le meilleur parti de la formation.

Le prix standard est de 150 € HT par personne.

PROCHAINS COURS VIRTUELS

Effacer les résultats
Sujet
Langue
Date et heure
Speaker
Spécialité
Design abutments for single tooth restorations using Dental System
English
Tue, Oct 27, 10:00 CEST
Chris Adamus
General Practice
You will learn how to obtain implant libraries and how to design various types of single abutments along with a positioning guide. As this in an interactive class, sharing screens is required.

Language:
English
Target group: Dental System users with at least 3 months experience who wish to start designing single abutment restorations
Prerequisites:
To participate, you must have:
- completed a Dental System basic course at least 3 months experience. You also need to have 
- Dental System installed, along with Abutment Designer, or CAD points available.

Duration: I hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainers: Chris Adamus, CDT - 3Shape Training & Application Specialist


You will receive a diploma after completing the course.
Sign up!
Design of full coverage anterior deprogrammer for in-house production
English
Tue, Oct 27, 13:00 CEST
Jenni Tuokko
Prosthodontics

You will learn how to design a full coverage anterior deprogrammer in the upper jaw. To join, you must have experience designing simple splint treatments. As this in an interactive class, sharing screens is required.

Language: English
Target group: Chairside dentists and orthodontists along with dental technicians who have experience with simple splint treatments and now wish to start using fully digital workflows to produce more complicated splint treatments.
Prerequisites: You must already be familiar with designing splints with 3Shape Splint Studio or have taken part in our basic splint design course. You also must have 3Shape Splint Studio installed.
Duration: 1 hour self-study, 2 hours with instructor 
Maximum participants: 6
Price: 75 EUR
Trainers: Jenni Tuokko, CDT - 3Shape Global Training & Application Specialist

You will receive a diploma after completing the course

 

Sign up!
Implant planning with 3Shape Implant Studio
English
Wed, Oct 28, 10:00 CEST
Marcus Marcussen
General Practice

Learn how to place single implants in the upper jaw with a range of tools and features that enable great results in implant planning. 
Please note that you should have 3Shape Implant Studio 19.1 or later installed in order to join, as this in an interactive class.
To maximize learning outcomes, it is mandatory that all participants share their screens during classes.

Language: English
Target group: 3Shape users who have purchased and installed Implant Studio 19.1 
Prerequisites:
- Implant Studio 19.1 installed on a computer
- Demo cases downloaded from the 3Shape Online Academy

Duration: 1 hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainer: Marcus Marcussen, CDT - 3Shape Global Training & Application Specialist

You will receive a diploma after completing the course


Sign up!
Create great smiles with 3Shape TRIOS Smile Design
English
Wed, Oct 28, 13:00 CEST
Chris Adamus
General Practice

Learn the full workflow for creating smiles in 3Shape Smile Design software and master all the available adjustment tools. Please note that you should have Smile Design installed in order to join, as this in an interactive class. Sharing screens is required, as this is an interactive class.

Language: English
Target group: 3Shape Dental Desktop users who have experience using TRIOS and wish to learn how to use TRIOS Smile Design software.
Prerequisites: 
- TRIOS Smile Design software installed on a computer
- Demo case downloaded from the 3Shape Online Academy

Duration: 1 hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainer: Chris Adamus, CDT - 3Shape Global Training & Application Specialist

You will receive a diploma after completing the course


Sign up!
Creating your own smile libraries from intraoral scans
English
Thu, Oct 29, 15:00 CEST
Marcus Marcussen
Prosthodontics

Learn how to create your own smile libraries to use in Dental System. If you are an experienced Dental System users with a minimum of 6 months experience, this virtual class is for you.

Please note that you must have Implant Studio 19.1 or later installed in order to join, as this in an interactive class. To maximize learning outcomes, as a participant you will be expected to share your screen with both the trainer and the other participants as you learn. 

Language: English
Taret group: 3Shape users who already have advanced  knowledge of Dental System
Prereqisites:
- Dental System 19 or higher installed
- Demo cases downloaded from the 3Shape Online Academy

Duration: 1 hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainer: Marcus Marcussen, CDT - Global Training & Application Specialisr

You will receive a diploma after completing the course.


Sign up!
Design clear aligners with 3Shape Clear Aligner Studio
English
Tue, Nov 3, 10:00 CEST
Rudy Labor
Clear Aligners

Learn to create a virtual setup, sub-diving and animating, as well as how to use advanced and automatic tools while designing a clear aligner. Please note that to maximize learning outcomes, we will ask you to kindly share your screen during the class. 

Language: English
Target group: 3Shape users who know how to use Ortho Planner and wish to learn how to design clear aligners using Clear Aligner Studio.
Prerequisites: 
- Clear Aligner Studio installed on a computer
- Demo case downloaded from the 3Shape Online Academy
Duration: 1 hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainer: Rudy Labor, CDT - 3Shape Global Training & ApplicationSpecialist

You will receive a diploma after completing the course


Sign up!
Design of Occlusal Splints for In-House Production
English
Tue, Nov 3, 15:00 CEST
Marcus Marcussen
Prosthodontics
Learn the fundamentals of scanning and designing an occlusal splint. As this is an introductory course, we will be focusing mainly on the tools and features in the workflow. Later courses will focus on design adaptation to get specific results. To join, you must have some experience with splint treatments. As this in an interactive class, sharing screens is required.

Language: English
Prerequisites:
You must already be familiar with intraoral scanning and have 3Shape Splint Studio installed. You must also have completed the self-study modules (approx 1 hour)
Target group: Chairside dentists and orthodontists as well as dental technicians who have experience with traditional splint treatments and now wish to start using fully digital workflows.
Duration: 1 hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainers: Marcus Marcussen, DCT - 3Shape Global Training & Application Specialist


You will receive a diploma after completing the course.
Sign up!
Design of a stabilization splint with anterior guidance for in-house production
English
Fri, Nov 6, 13:00 CEST
Jenni Tuokko
Prosthodontics
You will learn how to design a stabilization splint with anterior guidance in the upper jaw. To join, you must have experience designing simple splint treatments. As this in an interactive class, sharing screens is required.

Language:
English
Prerequisites:
You must already be familiar with designing splints with 3Shape Splint Studio or have taken part in our basic splint design course. You also need to have 3Shape Splint Studio installed. Sharing screens is required, as this is an interactive class.
Target group:
Chairside dentists and orthodontists along with dental technicians who have experience with simple splint treatments and now wish to start using fully digital workflows to produce more complicated splint treatments.
Duration: 1 hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainer: Jenni Tuokko CDT, Chris Adamus CDT - 3Shape Global Trainers & Application Specialists

You will receive a diploma after completing the course.
Sign up!
Implant Planning with 3Shape Implant Studio
English
Tue, Nov 10, 15:00 CEST
Dr. Jan Paulics
General Practice

Learn how to place single implants in the upper jaw with a range of tools and features that enable great results in implant planning. 
Please note that you should have 3Shape Implant Studio 19.1 or later installed in order to join, as this in an interactive class.
To maximize learning outcomes, it is mandatory that all participants share their screens during classes.

Language: English
Target group: 3Shape users who have purchased and installed Implant Studio 19.1 
Prerequisites:
- Implant Studio 19.1 installed on a computer
- Demo cases downloaded from the 3Shape Online Academy

Duration: 1 hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainer: Marcus Marcussen, CDT - 3Shape Global Training & Application Specialist

You will receive a diploma after completing the course


Sign up!
How to design a surgical guide with 3Shape Implant Studio
English
Wed, Nov 11, 13:00 CEST
Marcus Marcussen
General Practice

Learn how to design surgical guides for the upper jaw using the tools and features to add ID tags, bars and other elements. This session will focus exclusively on guide design (not implant planning). 
Please note that participants must have Implant Studio 19.1 or later installed in order to join, as this in an interactive class. To maximize learning outcomes, it is mandatory that all participants share their screens during classes.

Language: English
Target group: 3Shape users who already have a knowledge of implant planning and now wish to learn how to design surgical guides. 
Prerequisites:
- Implant Studio 19.1 installed on a computer
- Demo cases downloaded from the 3Shape Online Academy
Duration: 1 hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainer: Marcus Marcussen, CDT - 3Shape Senior Clinical Specialist

You will receive a diploma after completing the course.


Sign up!
Implant Planning and Surgical Guide Design for Edentulous Patients
English
Fri, Nov 13, 10:00 CEST
Dr. Jan Paulics
General Practice

Learn how to place multiple implants in the upper and lower jaw, utilizing the various tools and features to achieve best practices for implant planning and tissue supported surgical guide design for edentulous patients. Participants must have Implant Studio  19.1  installed in order to join as this in an interactive class. Sharing screens during the class is required.
Please note that participants must have Implant Studio 19.1 or later installed in order to join, as this in an interactive class. To maximize learning outcomes, it is mandatory that all participants share their screens during classes.

Language: English
Target group: Experienced users, with 6 months plus usage of Implant Studio
Prerequisites:
- Implant Studio 19.1 installed on a computer
- Demo cases downloaded from Online Academy
Duration: 1 hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainer: Dr Jan Paulics - 3Shape Senior Clinical Specialist

You will receive a diploma after completing the course.


Sign up!
Intraoral Scanning with TRIOS Part 1
English
Tue, Nov 17, 10:00 CEST
Marcus Marcussen
General Practice

In this first part of a two-part series, you will learn how to perform the initial TRIOS setup and handling procedures. You will also learn how to perform full arch scans of both jaws and collect the static and dynamic occlusion and send the scans to the lab and patient. To join, you must have a TRIOS, as this in an interactive class. Sharing screens is required, as this is an interactive class.

Language: English
Target group: Users who have recently purchased a 3Shape TRIOS and now wish to start learning.
Prerequisites: You must complete the self-study modules prior to joining (approx 1 hour)
Duration: 1 hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainers: Marcus Marcussen, CDT - 3Shape Global Training & Application Specialist

You will receive a diploma after completing the course.


Sign up!
Design of full coverage anterior deprogrammer for in-house production
English
Wed, Nov 18, 10:00 CEST
Jenni Tuokko
Prosthodontics

You will learn how to design a full coverage anterior deprogrammer in the upper jaw. To join, you must have experience designing simple splint treatments. As this in an interactive class, sharing screens is required.

Language: English
Target group: Chairside dentists and orthodontists along with dental technicians who have experience with simple splint treatments and now wish to start using fully digital workflows to produce more complicated splint treatments.
Prerequisites: You must already be familiar with designing splints with 3Shape Splint Studio or have taken part in our basic splint design course. You also must have 3Shape Splint Studio installed.
Duration: 1 hour self-study, 2 hours with instructor 
Maximum participants: 6
Price: 75 EUR
Trainers: Jenni Tuokko, CDT - 3Shape Global Training & Application Specialist

You will receive a diploma after completing the course

 

Sign up!
TRIOS Excitement Apps
English
Thu, Nov 19, 13:00 CEST
Dr. Ornella Delli Rocili
General Practice
During this virtual class you will:

- Learn how to best work with TRIOS Patient Monitoring, including monitoring the effects of treatment and the naturally-occurring changes in the state of patients' teeth, as well as using it as a communication tool.

- Learn the full workflow for creating smiles in 3Shape Smile Design software, and master all the available adjustment tools. 

- Learn how to use TRIOS Treatment Simulator to communicate the potential outcomes of an orthodontic treatment to your patients and gain great case acceptance.

Language: English

Target group:
3Shape Dental Desktop users who have the experience in using TRIOS and wish to learn how to use the TRIOS Treatment Simulator, TRIOS Patient Monitoring  and 3Shape Smile Design software.

Prerequisites:
- TRIOS Treatment Simulator software installed on a computer
- TRIOS Patient Monitoring software installed on a computer
- Smile Design software installed on a computer
- Going through the content on Online Academy 
- Demo cases downloaded from the 3Shape Online Academy

Duration: approximately 1 hour self-study and 2 hours with instructor

Maximum participants: 6

Price: 75 EUR

Trainer: Dr. Ornella Delli Rocili - 3Shape Global Trainer & Application Specialist


You will receive a diploma after completing the course.
Sign up!
Implant Planning with 3Shape Implant Studio
English
Mon, Nov 23, 10:00 CEST
Dr. Jan Paulics
General Practice
Learn how to place single implants in the upper jaw with a range of tools and features that enable great results in implant planning. 
Please note that you should have 3Shape Implant Studio 19.1 or later installed in order to join, as this in an interactive class.
To maximize learning outcomes, it is mandatory that all participants share their screens during classes.

Language: English
Target group: 3Shape users who have purchased and installed Implant Studio 19.1 
Prerequisites:
- Implant Studio 19.1 installed on a computer
- Demo cases downloaded from the 3Shape Online Academy

Duration: 1 hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainer: Dr Jan Paulics, 3Shape Senior Clinical Specialist

You will receive a diploma after completing the course
Sign up!
Design abutments for single tooth restorations using Dental System
English
Mon, Nov 23, 15:00 CEST
Marcus Marcussen
Restorative
You will learn how to obtain implant libraries and how to design various types of single abutments along with a positioning guide. As this in an interactive class, sharing screens is required.

Language: English
Target group: Dental System users with at least 3 months experience who wish to start designing single abutment restorations
Prerequisites: 
To participate, you must have:
- completed a Dental System basic course at least 3 months experience. You also need to have 
- Dental System installed, along with Abutment Designer, or CAD points available.

Duration: 1 hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainer: Marcus Marcussen, CDT - 3Shape Training & Application Specialist


You will receive a diploma after completing the course.
 

Sign up!
Create great smiles with 3Shape TRIOS Smile Design
English
Thu, Nov 26, 13:00 CEST
Chris Adamus
General Practice
Learn the full workflow for creating smiles in 3Shape Smile Design software and master all the available adjustment tools. Please note that you should have Smile Design installed in order to join, as this in an interactive class. Sharing screens is required, as this is an interactive class.

Language: English
Target group: 3Shape Dental Desktop users who have experience using TRIOS and wish to learn how to use TRIOS Smile Design software.
Prerequisites: 
- TRIOS Smile Design software installed on a computer
- Demo case downloaded from the 3Shape Online Academy

Duration: 1 hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainer: Chris Adamus, CDT - 3Shape Global Training & Application Specialist

You will receive a diploma after completing the course
Sign up!
Creating your own smile libraries from intraoral scans
English
Fri, Nov 27, 10:00 CEST
Chris Adamus
Prosthodontics
Learn how to create your own smile libraries to use in Dental System. If you are an experienced Dental System users with a minimum of 6 months experience, this virtual class is for you.

Please note that you must have Implant Studio 19.1 or later installed in order to join, as this in an interactive class. To maximize learning outcomes, as a participant you will be expected to share your screen with both the trainer and the other participants as you learn. 

Language: English
Taret group: 3Shape users who already have advanced  knowledge of Dental System
Prereqisites:
- Dental System 19 or higher installed
- Demo cases downloaded from the 3Shape Online Academy

Duration: 1 hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainer: Chris Adamus, CDT - Global Training & Application Specialist

You will receive a diploma after completing the course.
Sign up!
Plan digital bracket placement
English
Fri, Nov 27, 13:00 CEST
Sune Norregaard
Orthodontics
Learn how to place digital brackets to optimize treatment outcomes with Indirect Bonding Studio. You will learn how to select bracket libraries, adjust bracket positions, perform virtual extraction and IPR before validating and saving a case. To join, you  must have ortho planning software from 3Shape. As this in an interactive class, sharing screens is required.

Language: English
Prerequisites:
To join, you must already be familiar with 3Shape ortho planning software, including segmentation of models, and must have completed the self-study modules, and downloaded bracket libraries  
Target group: Users who have already been using 3Shape ortho planning software and now wish to start learning how to place digital brackets with Indirect Bonding Studio to plan treatment outcomes.
Duration: 1 hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainer: Sune Nørregaard, CDT - 3Shape Global Training & Application Specialist

You will receive a diploma after completing the course
Sign up!
In-house production of crowns
English
Mon, Nov 30, 15:00 CEST
Marcus Marcussen
General Practice

Learn how to design own restorations for production in-house. You will learn how to use the anatomy design tools and CAM module to design crowns.  To join, you must have TRIOS Design Studio in order to join as this in an interactive class. Sharing screens is required for the virtual class.

Language: English
Target group: Users who have already been using a 3Shape TRIOS for at least 6 months and now wish to start learning how to design and produce restorations in-house.
Prerequisites: 
Participants must already be familiar with TRIOS scanning strategies and have completed a TRIOS training prior to joining the virtual classroom.
Duration: 1hour self-study, 2 hours with instructor
Maximum participants: 6
Price: 75 EUR
Trainer: Marcus Marcussen, CDT - 3Shape Global Training & Application Specialist

You will receive a diploma after completing the course.


Sign up!

Formations individuelles en ligne

Chaque cabinet ou laboratoire dentaire a ses propres besoins. Que vous débutiez dans le domaine du numérique, à la recherche d'une formation de base sur les techniques de numérisation, ou que vous soyez un utilisateur plus expérimenté désireux de maîtriser un flux de travail spécifique, une session de formation personnalisée avec un expert 3Shape vous permettra d'élargir vos compétences exactement comme vous le souhaitez. Il suffit de définir le produit 3Shape que vous utilisez et ce que vous voulez apprendre, et nous veillerons à ce que vos objectifs soient atteints en vous proposant une formation sur mesure.

Prix de lancement : 240€TTC par personne.
Durée 3h maximum (9h00-12h00 ou 14h00-17h00).

Réserver une session


TROUVEZ UNE FORMATION PRÈS DE CHEZ VOUS

Appliquez immédiatement vos nouvelles compétences

Les formations en présentiel sont organisées dans nos centres spécialisés. Nos cours adoptent une approche pragmatique et utilisent des exemples du quotidien pour illustrer les meilleures pratiques et vous donner des conseils et des astuces, afin que les connaissances que vous avez acquises soient directement applicables à votre travail. Nos formateurs possèdent de nombreuses années d'expérience dans le domaine de la dentisterie numérique et sont des professionnels qualifiés. 

Faites connaissance avec les formateurs de notre siège social

Christopher Adamus

Prothésiste dentaire
Christopher est diplômé de l'École de prothèse dentaire de Varsovie en 2005. Il possède une grande expérience dans la numérisation, la conception et la fabrication de prothèses complexes par usinage et impression 3D.

Jenni Tuokko

Prothésiste dentaire
Jenni est prothésiste dentaire spécialisée en prothèse fixe et en restauration esthétique. Elle a travaillé dans plusieurs laboratoires et centres de fabrication dentaires et maîtrise diverses applications de CFAO.

Dr Ornella Delli Rocili

Docteur en chirurgie dentaire
Docteur en chirurgie dentaire, Ornella a obtenu son diplôme au Venezuela en 2010 et a travaillé en tant qu'omnipraticienne dans des établissements de santé publics et privés. Elle est spécialiste TRIOS®, TRIOS Design Studio® et Implant Studio®.

Sune Nørregaard

Prothésiste dentaire
Sune est prothésiste dentaire. Il a obtenu son diplôme en 1995 et possède plus de 15 ans d'expérience dans des laboratoires dentaires et d'orthodontie. Sune est spécialisé dans les travaux dentaires numériques, notamment les travaux implantaires et orthodontiques.

Dr Jan Paulics

Docteur en chirurgie dentaire
Docteur en chirurgie dentaire, diplômé de l'Institut Karolinska à Stockholm en 1993, Jan est spécialisé en chirurgie implantaire et dento-alvéolaire, avec un accent sur la chirurgie guidée par la prothèse et l'utilisation des outils de planification numérique et des guides chirurgicaux.

Marcus Marcussen

Prothésiste dentaire
Marcus est prothésiste dentaire diplômé. Il possède 14 ans d'expérience en CFAO dentaire et a travaillé en Angleterre et au Danemark.

Dr Ornella Delli Rocili

Docteur en chirurgie dentaire
Docteur en chirurgie dentaire, Ornella a obtenu son diplôme au Venezuela en 2010 et a travaillé en tant qu'omnipraticienne dans des établissements de santé publics et privés. Elle est spécialiste TRIOS®, TRIOS Design Studio® et Implant Studio®.

Rudy Labor

Prothésiste dentaire
Rudy est prothésiste dentaire. Il a géré son propre laboratoire dentaire en France avant de devenir Spécialiste en logiciels d'orthodontie chez 3Shape.

Jenni Tuokko

Prothésiste dentaire
Jenni est prothésiste dentaire spécialisée en prothèse fixe et en restauration esthétique. Elle a travaillé dans plusieurs laboratoires et centres de fabrication dentaires et maîtrise diverses applications de CFAO.

Marcus Marcussen

Prothésiste dentaire
Marcus est prothésiste dentaire diplômé. Il possède 14 ans d'expérience en CFAO dentaire et a travaillé en Angleterre et au Danemark.

Rudy Labor

Prothésiste dentaire
Rudy est prothésiste dentaire. Il a géré son propre laboratoire dentaire en France avant de devenir Spécialiste en logiciels d'orthodontie chez 3Shape.

Supports de formation sur demande

Nos vidéos de formation, guides pratiques et autres ressources vous aident quand et où vous en avez besoin : à votre domicile, sur votre lieu de travail ou en déplacement. 
You're about to get redirectedWe are renovating our website, so you will see a different layout in the page you requested. Do you want to continue?
;